Description

• Battery capacity: 320Wh / 100,000mAh
• Battery type: LiFePO4
• Maximum total output: 130W
• Solar input: Up to 100W
• USB-C output: Up to 65W
• USB-C second port: Up to 20W
• USB-A outputs: Four ports, up to 20W each
• DC output: 12V/2A
• LED light: 2W
• Dimensions: 190 × 65 × 190mm
• Weight: Approximately 3.5kg
• Model: IESS-320T
• Charging options: Solar and USB-C/mains charging

Appliance and Device Capacity

The 130W output makes the itel Power Go suitable for small electronic devices and DC loads. Its 65W USB-C port is particularly useful for compatible laptops and other USB-C devices. The manufacturer/distributor specifically lists laptops, phones, routers/modems and other USB-powered electronics among its intended applications.

The Power Go does not have a 220V AC socket, according to the detailed product specification. Therefore, conventional AC appliances such as a standard television, blender, microwave or AC fan should not be presented as compatible loads for this particular model.

Battery Capacity and Runtime

The 320Wh LiFePO4 battery provides a reasonable amount of stored energy for a small portable power station. The manufacturer lists the following examples:

However, some of these examples exceed the Power Go’s stated 130W total output, so the manufacturer’s runtime examples should be interpreted carefully rather than as confirmation that every listed load can be powered directly by the unit. The detailed IESS-320T specification states a 130W maximum output.

Solar Charging

The itel Power Go supports solar charging with a maximum PV input of 100W. Its listed DC input range is 11–24V/5A, giving it a relatively small solar charging capacity compared with larger solar generators.

With a suitable solar panel, the 100W maximum input allows the 320Wh battery to be recharged during the day without relying entirely on grid electricity. A retailer specification also lists approximately 3.5 hours for charging with a 100W input under suitable conditions, although actual charging time will vary with solar conditions and charging efficiency.

Design and Portability

Portability is one of the main characteristics of the Power Go. At approximately 3.5kg and measuring 190 × 65 × 190mm, it can be carried relatively easily between rooms, taken to work or used while travelling. It also incorporates an LED light, which adds a useful emergency-lighting function.

The multiple USB ports allow several small devices to be connected at the same time, although the combined load must remain within the station’s 130W maximum output.

Benefits

• 320Wh LiFePO4 battery capacity.
• 130W maximum output for small electronic loads.
• 65W USB-C output suitable for compatible laptops.
• Up to 100W solar charging input.
• Multiple USB-A, USB-C and DC outputs.
• Compact 3.5kg design.
• Built-in 2W LED light.
• Designed for portable backup rather than fuel-powered generation.
• LiFePO4 battery technology.
• Suitable for phones, compatible laptops, routers and other low-power electronics.

Summary

Final Verdict

The itel Power Go 130W is a small portable solar power station aimed at users who primarily need backup power for phones, compatible laptops, routers, USB devices and other low-power electronics. Its 320Wh LiFePO4 battery gives it more storage than a conventional power bank, while the 100W solar input provides a way to recharge it away from the grid.

Its main distinction is that it is a DC/USB portable power station rather than a conventional AC solar generator. With a 130W maximum output and no 220V AC socket, it should be considered for electronics and small DC loads rather than general household appliances.